Best Miter Saw for the Money – 2020 Budget Miter Saw Reviews and Buying Guide

If you are looking to buy a budget miter saw, then the best miter saw under 200 dollars category is worth look at. A few things you should look out for when buying a miter saw include the blade size, Amp, laser guides, dust bags and most importantly, the cost. However, this is easier said than done, and with so many options on the market, narrowing down to one can be challenging and this is where we came in to make it easier.   

We have reviewed the top 9 best miter saw under 200 dollars where we have included a comparison table, pros and cons for each, and a comprehensive description of each product to highlight the unique features and performance. We have also written a complete meter saw buying guide and FAQs about miter saws.

Best Miter Saw for the Money Buying Guide

A miter saw is a very handy tool especially for a person who owns a garage or a workshop or a person who enjoys working on wood or metal. The miter saw is very instrumental when it comes to trimming, cutting and framing. Therefore it is important to select the best miter saw since it is considerable an investment. Highlighted below is a detailed guide on the factors to consider while buying a miter saw plus some FAQs.

Power and Motor

One of the factors to consider while buying a miter saw is its power output. Different miter saws have different power outputs, but you want to go for the 15 amp miter saw. The common range of power output for miter saws is 10-15 amps.

Additionally, consider the motor type of the miter saw. There are usually two types, direct driver motors and belt driven motors. However, the direct driver motors are better since the belt driven motors are not as hardy and they burn out faster.

Size

Different miter saws have varying blade diameters depending on their size. The most common size is the 10’’ and 12’’ diameter blade. The 10’’ diameter blade will suffice for most users especially those who are not involved in very large projects. However, if you engage in larger projects, it is prudent to go for the 12’’ blade since it cuts deeper and wider. Note that you cannot use a 10’’ blade on a 12’’ miter saw or vice versa.

There are three types of miter saws, namely;

  • The compound miter saws cut a different angle; they tilt to one direction only, the left to be specific. This is suitable if you want to cut at more than two angles, for example crown molding.
  •  The dual-bevel compound miter saw tilts to both the left and right and you can therefore cut bevels at any angle without flipping your work piece.
  • The sliding compound miter saw moves back and forth. The blade can move and therefore, this type of miter saw can cut wider work pieces.

The best miter saw to buy?

Having identified the different types of miter saws, you should buy according to your needs. The most common miter saws are the 10 inch. They are recommended for both professionals and for people who want to do home projects by themselves. Almost all mini miter saws share the same features such as the 15 amps motor. They are pretty affordable and are easy to use and maintain.

Before settling on a miter saw you saw on a commercial advertisement, here are a few things you should look out for.

  • Blade size. Most saws that a 10” inch blade. This is an okay size but if you want to make longer cuts ten you should buy a saw with a larger diameter.
  • Changeable blades. Having a saw that allows you to change blades is an added advantage.
  • Amps calculate the power of your saw motor, if you want a saw a higher cutting power you should buy one with higher amps.
  • Shaft and spindle locks. If you will be working around children, the safety is a great factor to consider. These locks immobilize the blade and shaft when changing blades making the task a lot easier and safer.

Types of Miter Blades

There are three types of blades available in the market. The three are the normal steel blades, the high speed steel blades (HSS) and finally the carbide tipped blade.

  • Normal Steel Blades

The normal steel blade is perfect for cutting through wood. However, they get blunt very fast when you use them on metal or hardwood.

  • High Speed Steel (HSS)

They are similar to the normal steel blades but are tougher. They can also withstand high temperatures which makes them last longer.

  • Carbide Tipped Blade

The last type of miter saw blade is the carbide tipped. They are the toughest and as such, they last longer. Additionally, they can cut through tough material such as metal and hardwood.

Frequently Asked Questions (FAQs) about Miter Saws

Here are some of the frequently asked questions about miter saws.

  • What Is The Use Of A Miter Saw

A miter saw is very effective in cutting both angular and straight cuts across the surface of both metal and wood. Specifically, you can perform bevel cuts, angular cuts or crosscuts.

  • Is There A Difference Between A Miter Saw And A Chop Saw?

Although some people use miter saw and chop saws interchangeably, the two machines have a distinct difference. Although the miter saw can be used for a number of cuts, the chop saw can only be used to make crosscuts.  Additionally, Chop saws are used for heavy duty work and they can cut through a wide range of materials.

  • Is There Need For A Miter Saw While I Have A Circular Saw?

Although the circular saw is very versatile, and is good for most straight cuts, it is less accurate. On the other hand, the miter saw is very precise and is perfect for angular cuts.

  • What About The Double Bevel Miter Saw?

The double bevel miter saw is different from the normal miter saw in that it can cut both on the right and left direction. It can cut on both directions on the same settings and you do not need to move or turn your piece in order to make a bevel cut in the opposite direction.

  • Which Miter Saw Size Is The Best For Me?

The size of the miter saw that you will buy depends on the size of your work. If you work on large projects which involve larger beams, then it is wise to go for the 12’’ blade. However, if your projects are smaller and do not involve large beams, the 10’’ blade will do.

  • Which Size Can A 10’’ Miter Saw Cut?

A 10’’ blade can cut a 5.5 inches wide 90 degrees angle crosscut without any problems. It can also cut through a 2 by 6 lumber easily. It can also make a 45 degrees miter cut and cut through a 2 by 4 lumber. On plywood, the 10’’ blade can cut up to a thickness of 1.25 inches.

  • What About The 12’’ Blade

With a 12 inch blade, you can comfortably cut through material as thick as 3.5 inches and as wide as 7.5 inches. The blade can easily cut a 45 degrees angle on a 2 by 6 lumber or make a 90 degrees crosscut on a 2 by 8 lumber.

  • Can A Miter Saw Be Used To Cut Through Metal?

Well, it depends. The simple answer is yes but it also depends on the toughness of the metal and the type of the blade on the miter saw. For softer metals like Aluminum, the High speed steel (HSS) can be used. Whoever, for tougher metals, the carbide blades are preferable. It is advisable to get the carbide blades since they are stronger thus last longer and make better cuts.


Top 9 best miter saw under 200 dollars in 2019

  1. Hitachi C10FCH2 10-inch Saw with Laser Marker

Why we like it: It has a laser marker system for better cutting precision, a powerful 15 Amp motor and a miter angle range of 0-52 to both the left and right for better flexibility.


It also has a soft, horizontal and vibration reducing grip handle for added comfort. Again, it is very light weight therefore making it easy to carry around.

Product Description

The Hitachi 10 inch saw with laser marker is a powerful tool that is easy to use for your first cut. It has a horizontal handle with a vibration reducing elastomer grip that provides good support.


The saw also features a built-in clamping system that secures your piece of wood in place and a dust collector that reduces the accumulation of dust particles in your work area and most importantly the interior components of the equipment. Carbon brushes used to clean the saw are readily available and this helps increase the longevity of the saw.


Moving on to the technical bit, the C10FCH2 has laser markers that offer smooth and precise miters and crosscuts. The laser marker system can be activated before starting the blade for predictable placement.


Also, this 10-inch saw has a powerful 15 Amp motor for the hardest cutting jobs. Its compound cutting capabilities and flexible miter angles provide versatility when working. The miter angle ranges from 0-52 degrees and the miter stops are thumb actuated and this allows for easy change of the blades angle.


The bevel range to the left is 0-45 degrees. The blade has a diameter of 10 inches which allows you to accurately cut larger pieces of up to 2-5/16 inches high and 5-21/32 inches deep. You can change the blades depending on what you’re cutting.


The saw weighs 26.5 pounds making it one of the lightest and most portable in the market. It is powered up using electricity, approximately 120 volts.


The good

It has a horizontal handle with a vibration reducing grip for a firmer hold. The laser guide can be activated before you start cutting, this helps you make more precise cuts. It also enables you to make more angled cuts


The bad

The laser quality limits where it can be used. You have to be in a somewhat dark environment when using it.


Pros

  • Well designed using quality materials. It is designed to make work easier even for a beginner.
  • Has a sturdy grip with no vibration.
  • It is affordable. For the amount you’re paying, this saw is definitely worth every penny.
  • Has a laser marker for increased precision and predictable blade placement.

Cons

  • Laser is dim in the outdoors but you can alter this by adding shade in your work area to block out the sun or working indoors in dim light.

2. Hitachi C10FCG Single Bevel Compound Miter Saw

Why we like it: It has a meter angle range of 0-52 degrees from left to right and a bevel range of 0-45 degrees to the left and this provides increased flexibility and accurate bevel cuts respectively.


Also, it is very light weight thus easy to maneuver and transport from one place to another. Moreover, the saw features a 15Amp motor for the hardest cutting work and a large working table that features a vice clamping system.

Product Description

The Hitachi C10FCG compound miter saw in 10 inches is suitable for framers and trim carpenters. This saw has a 15 Amp that generates high power for making miters and crosscuts effortlessly.


Also, the C10FCG is the lightest 10-inch compound miter saw in the market weighing 24.2 pounds only. Its light weight nature does not comprise its quality or its features. Also, this miter saw has large table and a vice clamping tool that holds your materials in place when working.


Again, this miter saw offers more flexibility due to the 0-52-degree miter range to the left and right. The thumb actuated miter stops allow easy miter adjustments when using the saw. For clean bevel cuts, the C10FCG bevel has a range of 45 degrees to the left for more accuracy.


It also has an extended flip fence which goes as high as four inches. To increase the life span of the saw and keep your work area clean, it comes with a dust collector attachment. It has a horizontal handle for a more secure and firm grip when working. It uses electricity of at least 120 volts or 1800 watts and it also uses the metric measurement system.


Make sure to use the right extension cords when using this saw to avoid any accidents and damages. You are guaranteed to get your money’s worth if you do settle on the Hitachi C10FCG miter saw which comes with five-year warranty.


The good

This saw is cost friendly and very flexible. It is extremely lightweight and is easy to move around. The 15-amp motor produces a no-load speed of five thousand revolutions per minute. Its bevel range provides neat and precise bevel cuts.


The bad

The laser is dim and is only visible in low light.

Pros

  • It is easy to use. The horizontal handle and the miter degree range help in providing a firm grip and increasing flexibility.
  • This saw is well constructed and is definitely worth the buy.
  • Light weight. It is the lightest 10 inch saw in the market and is therefore more portable
  • Dust collector attachment. 

Cons

  • Laser is dim, try using it in low lighting conditions to improve its visibility.

3. Genesis GM1015LC 15-Amp 10-Inc Compound Milter Saw 

Why we like it: The Genesis GM1015LC performs compound miter cuts easily and uses compound cutting for shadow boxes and crown molding. It has a laser cutting guide for more precision and quicker alignment.


Electric brakes installed in the saw stop the blade in matter of seconds and the arbor lock enables faster and safer blade changes. The genesis GM1015LC incorporates a dust bag, hold down clamp, blade wrench, two extension wings and two triple A batteries for laser.

Product description

The Genesis miter saw has the following feature; a powerful 15 Amp motor and a sixty-tooth blade for great finishes. The laser guide offers improved accuracy and directs the carpenter on why to place the blade.


Also, the electric brakes are a unique feature in this miter saw and they help stop the blades almost immediately after being activated. This increases safety and reduces the risk of damaging your material. The hold down clamp enables your wood or whatever you’re working on to stay in place and it also prevents any accidents. This is particularly helpful when you are working with a thinner material that is more likely to move around.


The arbor lock makes changing of blades safer and quicker while the included dust bag help reduce dust particles, therefore, keeping your work area and saw clean.

Again, the laser in the GM1015LC uses batteries, 2-AAA batteries to be specific which are provided by the seller, it is red in color and this increases its visibility. The miter saw itself is powered by AC, alternating current, at 120 volts.


The saw works fast with a speed of 4600 revolutions per minute and it uses a ten inch long blade. You can however change the blades depending on your preference. It weighs 24 pounds and is therefore portable. The saw comes with a two year warranty of both labor and parts. This means that any defective parts will be replaced or repaired by the manufacturer.


The good

This 10” compound miter saw has a 15 amps motor which is higher than most saws of the same caliber. The 60-tooth blade provides excellent finishes and the electric breaks are able to stop the blade in a blink of an eye.


The bad

Most customers had problems aligning the laser to the middle, not all saws had this issue however, and the company should work to resolve the issue.

Pros

  • Laser guide. The laser is bright and visible and it increases accuracy.
  • It is cost friendly, definitely worth your money.
  • The blade is firm and cuts easily
  • It is portable
  • Cons

    • Laser alignment might be difficult.

    4. Delta Power Equipment Corporation, Slide Miter Saw, S26-263L Shopmaster 10 In. with Laser

    Why we like it: This miter saw has a few unique features that make it more preferable. The table extensions aid in supporting longer work pieces.


    Again, the laser on this saw has an on and off button that helps save energy by only having it on when you’re using it. 


    Also, it is super lightweight and this makes it easier to transport it. And, it also has a spindle lock which ensures the blade is safely loosened and removed.

    Product description

    The new 2018 shopmaster 10-inch slide miter saw by Delta power Equipment Corporation incorporates new and exciting features that will make your work easier. Table extensions support long work pieces and keep them in place. Working with longer pieces can be a challenge so these table extensions are definitely an added advantage.


    With this saw, the bevel has a range of 0 to 45 degrees and this increases flexibility of the saw. Again, the spindle lock is very useful when it comes to changing blades. It makes the process quicker and safer. Plus, the laser on this miter saw has an on and off button. Laser helps in aligning the blade and making accurate cuts. A dust bag is also included and it helps in preventing dust particles from damaging the saw and in keeping your work area tidy.


    And, the saw is also extremely light, weighing 15.12 pounds only, this makes it easier to move it around. It uses the metric measurement system for calculations, which is the standard system for most miter saws. Again, it is powered by electricity of 120 volts or 1800 watts. When using it, it is recommended that you use the correct cords in order to prevent any accidents. The manufacturing company provides a three-year warranty in case of any problems with the saw.


    The good

    It has preset miter stop that make work easier. Laser guide makes blade alignment easier and improves cutting accuracy. Batteries required for laser are included in the packaging. Warranty includes both labor and parts.


    The bad

    Seller does not provide storage for the blade and some customers had trouble aligning the laser properly.

    Pros

  • It is lightweight and therefore portable
  • It has laser more precise cutting
  • It is affordable and of very good quality.
  • Cons

    • The saw tends to jump up on startup, but the issue corrects times self with time.

    5. ShopSeries RK7136.1 14 Amp 10” Miter Saw with Stand

    Why we like it: This Shopseries miter saw features a 14 Amp motor and a bevel that adjusts from 0-45 to the left. It made of a long-lasting die-cast aluminum construction and it also has a stand.it is ideal for woodworking projects.

    Product description

    This miter saw is built for performance. It has a 14-amp motor that power the saw through a range of woodworking jobs such as framing and wainscoting. About the general construction, it is made from aluminum and this makes it durable.


    The bevel angles range from 0-45 degrees and the saw has stops at the frequently used angles and they help accommodates most cuts. Its dust collector integrated in the saw helps maintain good condition of your work area and your saw as well.


    About portability, this miter saw is lightweight and, therefore, easy to transport. It features sturdy metal legs that can be easily assembled and disassembled without any tools. The leg system used in its construction allows it to support longer work pieces.

    Also, the infeed and outfeed support can put up with a maximum of 10 feet of the normal 2-by-4 material. And lastly, it requires 120 volts and a power input of 14 amps to run and it works very fast with a no-load speed of 5200 revolutions per minute. The manufacturing company provides a two-year warranty in case of any problems with the saw.


    The good

    It comes with a stand for added support when working. It is also made of aluminum which is a durable metal.


    The bad

    No batteries or power source is included in the packaging. You can always get them on your own but it would be much better if they did.

    Pros

  • It comes with a stand for added support.
  • It is built from long lasting aluminum
  • The dust attachment helps keep your work place clean
  • comes with brackets that are able to hold longer pieces in place
  • Cons

    • The user manual lacks vital information to operate the saw, but you can always refer back to the company’s website for more information.

    6. Evolution Power Tools R255SMS 10” TCT Multi-Material Sliding Miter Saw

    Why we like it: This miter saw from Evolution power tools is powerful, reliable and safe. It has a motor life of 160 hours and can endure up to 40,000 cuts. The 15 Amp motor increases efficiency and makes cutting steel easier. The horizontal trigger has a firm and comfortable grip that prevents repetitive strain.

    Product description

    The Evolution Power R255SMS has amazing features that will make work easier for you. The 15 Amp motor helps the saw run faster and therefore get more work done. The blade does not produce any sparks or heat when cutting metal and this technology allows the cut material to be handled faster since no cooling is needed. This also helps in preventing any accidents caused from the emission of sparks and fumes.


    Also, the saw uses multi-purpose cutting technology that allows one blade to cut all materials including steel, wood and aluminum. The cut is smooth and square. It also provides accurate cutting from the laser guider, adjustable depth of cut and 11-13/16-inch sliding functionality. It operates using 120 volts of electricity and it comes with a 120-length cord that allows you to freely maneuver. It weighs 34 pounds so it can be carried from one place to another with ease.


    The Good

    Most saws emit sparks when cutting metal, but the evolution power saw uses special technology that cools down metal when you are cutting and, therefore, no sparks are emitted. The blade is also multi- functional and this saves on cost.


    The bad

    It is ten pounds heavier than most mini saws in the market. It does not prevent its portability but it could be lighter.

    Pros

  • It is multi-functional. The blade can cut any material.
  • It comes with a long cord of 120 inches.
  • The 15Amp motor increases the efficiency of the saw
  • Cons

    • Some customers had problems with the laser and the blade when cutting a straight vertical line but not to worry, the company will repair any defects under the warranty.

    7. Makita 10” Compound Miter Saw

    Why we like it: This Makita 10” compound miter saw runs on a powerful 15 Amp drive motor with a speed of 4600 RPM.

    It has miter cuts of 0-45 degrees to the left and 0-52 degrees to the right. It aims at combining performance, power and ease of use for an unforgettable experience. 

    Product description

    This 10” compound miter saw is well constructed with an aluminum base for more accurate cuts. It has other great features such as shaft lock which allows easy blade changes. It has a dual post compound arm and fluorescent light make this saw easy to use and increases comfort. The bulb works independently from the rotation and its function is to illuminate the wok surface for better visibility. It weighs 27.3 pounds for easy portability.


    Also, the 15 amps motor works seamlessly with saw for better performance with the saw which has aped of 4600 RPM. The motor also provides smoother start-ups and continuous power.


    And, the Makita 10-inch compound saw has bevel cuts of 45 degrees to the left, a dual post compound pivot arm and miter cuts of 0-45 degrees to the left and 0-52 degrees to the right for better performance and precise cutting.


    It also has nine preset positive miter stops. The bevel cuts up to 45 degrees to the left. This saw is suitable for woodworkers, finish carpenters, cabinet installers and all contractors.


    The Good

    It comes with a fluorescent bulb for better visibility. This is a unique feature that is actually very helpful when working. The aluminum base offers more stability when working. Batteries are provided.


    The Bad

     In some cases, the type of angled cut you get is limited depending on the size of your work piece but the straight cut is always available.

    Pros

  • It is portable
  • Measurements are accurate and the cuts as well.
  • Preset angles make work easier.
  • It is very sturdy
  • Cons

  • Some customers complained of poor painting on the saw.
  • Shipping the product was a challenge for some people. Make sure you use a reliable shipping company.
  • 8. TACKLIFE Sliding Compound Miter Saw with Laser Guide

    Why we like it: This TACKLIFE 12-inch miter saw has a powerful motor of 1700W for efficient cuts and longer durability.

    The laser guide is controlled by one switch and it marks the cutting line even in longer work pieces. It also has double bevel cutting. The dust bag on this saw collects 70% of all the dust generated.

    Product description

    The TACKLIFE miter saw has a lot of great features. It has stronger 15 Amp motor that allows the saw to perform at 3500 revolutions per minute making cutting easier and faster. The laser guide helps make straight cuts easily and more accurately.


    If features a double bevel that allows you to make cut on both sides with an angle range of 45 degrees to the left and right. You can also make single cuts using this saw. It has a sliding design for extended flexibility and additional cutting width.


    The working table has a scaled miter angle ranging from 45 degrees left to 45 degrees right. This allows you to work efficiently on different working requirements. Built-in clamping device provides stability and improves safety when working.


    Again, the cutting handle has a comfortable soft grip and the base angle change handle help improve the user’s comfort. The saw comes with a three-meter cable that allows you work freely without any restrictions. The miter saw uses corded- electricity to source power.


    The good

    The seller provides carbon brushes that are required to clean the motor of the saw. A one year service card is provided to help the buyer maintain the saw. The miter scale has positive stops that make work much easier. The highlight of this miter is the double bevel cutting system.


    The bad

     Changing blades has been challenging to some customers since the torque tool provided could not get the bolts out.

    Pros

  • It is easy to use
  • Miter and bevel angles are easy to change
  • Great customer service.
  • Cons

  • Changing blades can be a challenging and will require more effort. 
  • 9. WEN 70712 12Inch Sliding Compound Miter Saw.

    Why we like it: The WEN 70712 twelve-inch miter saw provides bevel and compound cuts all in one machine.

    Its bevel angle ranges from 0 – 45 degrees to the left and the miter 45 degrees to the left and right. It has a powerful 15 Amp motor that enables the saw to work at a speed of 5000 RPM.

    Product description

    The saw has a 15 amps motor that allows it to cut at a speed of 5000 RPM. This allows it to cut boards as thick as 3.5 inches and as long as 11.75 inches. The 40-tooth blade that comes with the saw offers precise and dependable sawing.


    The dust collection bag reduces post sawing cleaning. The hold down clamp secures your workpiece in place and prevents it from moving. It has nine positive table spots at the frequently used miter positions.


    It has a spacious work table that provides 120 square inches of depth and two workpiece support extensions. It has a blade cover that retracts when the blade is in use; it maximizes safety and prevents any accidents from occurring. The saw weighs 42 pounds and is therefore portable.


    The Good

    The saw works at a high speed that allows you to get more work done. The blade cover is a great addition that not only protects the blade but also prevents accidents.


    The Bad

     Some customers complained of loose bolts on the blade and also inadequate stops on the miter. 

    Pros

  • It is easy to use
  • It is cost friendly
  • It is sturdy and has a large work area.
  • Cons

  • The saw is loud so you should have protective wear on when using it.
  • Rusting, you should paint over it to prevent this from happening.
  • Wrapping it up

    It is important to find out all you can about a miter saw before you make the final purchasing decision. We believe that the above compound miter saw buying guide and the miter saw reviews, you can easily pick up the best miter saw for the money. We have also highlighted the most important factors to consider before buying a miter saw. If you are not ready to invest in a really expensive option, a budget miter saw is a great option. Good luck!

    Leave a Comment